MENU

PP device

Pneumatic presser foot pressure regulator

For defect prevention - Support devices for feed or presser foot

  • Unlike the conventional control method for the presser foot pressure, this device is air-controlled. Even if you set a light presser foot pressure, the machine keeps responding to the fabric. Even if the fabric thickness and/or the fabric characteristics changes on cross seam sections, or under similar sewing conditions, the presser foot pressure remains constant and as light as possible, preventing fabric-related trouble, such as fabric damages. These features contribute dramatically to stabilizing and increasing the quality of your products.
  • Converting the presser foot pressure into numerical form makes it possible to reproduce the presser foot pressure appropriate to the fabric easily and immediately. Even if you use stretchy fabrics, extra lightweight fabrics, or similar fabrics, a machine equipped with this device responds to the fabric, drastically decreasing the time required to make adjustments, and increases production. Thus, this device is most suitable for small-lot production of a diverse product mix.

Sewing machine models which the device can be installed on

EX series

EX3200 : Safety stitch machines

  • HIGH GRADE
  • Bottom feed
Subclasses Use Maximum speed Fabric weight Remarks Video
EX3216-02/223 ・[Use]Plain seaming ・[Maximum speed]7,500 sti/min ・[Fabric weight]Light~Medium ・[Remarks]
  • ・[Video]
EX3216-03/233 ・[Use]Plain seaming ・[Maximum speed]7,500 sti/min ・[Fabric weight]Medium~Heavy ・[Remarks]
  • ・[Video]
EX3215(6)-03/333 ・[Use]Plain seaming ・[Maximum speed]7,000 sti/min ・[Fabric weight]Medium~Heavy ・[Remarks]
  • ・[Video]

EX series

EX5200 : Overedgers

  • HIGH GRADE
  • Bottom feed
Subclasses Use Maximum speed Fabric weight Remarks Video
EX5204-02/233 ・[Use]Plain seaming ・[Maximum speed]8500 sti/min ・[Fabric weight]Light~Medium ・[Remarks]
  • ・[Video]
EX5214-03/333 ・[Use]Plain seaming ・[Maximum speed]7,500 sti/min ・[Fabric weight]Medium~Heavy ・[Remarks]
  • ・[Video]
EX5214-M03/333 ・[Use]Plain seaming ・[Maximum speed]7,500 sti/min ・[Fabric weight]Medium~Heavy ・[Remarks]For tightening the needle thread on heavy weight fabrics
  • ・[Video]
EX5214-M03/333K ・[Use]Plain seaming ・[Maximum speed]7,500 sti/min ・[Fabric weight]Medium~Heavy ・[Remarks]For tightening the needle thread on heavy weight fabrics
  • ・[Video]

W3500P series

W3562P : Oil barrier type, flatbed, interlock stitch machines

  • MIDDLE CLASS
  • OIL BARRIER
  • Bottom feed
Subclasses Use Maximum speed Fabric weight Remarks Video
W3562P-01G ・[Use]Plain seaming (Covering)(Hemming) ・[Maximum speed]6,000 (5,000 with DDM) sti/min ・[Fabric weight] ・[Remarks]
  • ・[Video]

W3600P series

W3600P : Oil barrier type, cylinder bed, interlock stitch machines

  • MIDDLE CLASS
  • OIL BARRIER
  • Bottom feed
Subclasses Use Maximum speed Fabric weight Remarks Video
W3664P-01G ・[Use]Plain seaming (Covering)(Hemming) ・[Maximum speed]6,000 (5,000 with DDM) sti/min ・[Fabric weight] ・[Remarks]
  • ・[Video]

W500P series

W562P : Oil barrier type, flatbed, interlock stitch machines

  • HIGH GRADE
  • OIL BARRIER
  • Bottom feed
Subclasses Use Maximum speed Fabric weight Remarks Video
W562P-01G ・[Use]Plain seaming (Covering)(Hemming) ・[Maximum speed]6,000 sti/min ・[Fabric weight] ・[Remarks]
  • ・[Video]

W600P series

W600P : Oil barrier type, cylinder bed, interlock stitch machines

  • HIGH GRADE
  • OIL BARRIER
  • Bottom feed
Subclasses Use Maximum speed Fabric weight Remarks Video
W664P-01G ・[Use]Plain seaming (Covering)(Hemming) ・[Maximum speed]5,500 sti/min ・[Fabric weight] ・[Remarks]
  • ・[Video]

FS700P series

FS700P : Feed-off-the-arm, cylinder bed, 4-needle interlock stitch machines for flat seaming

  • HIGH GRADE
  • OIL BARRIER
  • Bottom feed
Subclasses Use Maximum speed Fabric weight Remarks Video
FS703P-G2 ・[Use]Sewing swimsuits ・[Maximum speed]4,200 sti/min ・[Fabric weight]Light ・[Remarks]Double edge trimming, with a special groove on the back of the presser foot
  • ・[Video]
FS703P-G2B ・[Use]Sewing swimsuits ・[Maximum speed]4,200 sti/min ・[Fabric weight]Light~Medium ・[Remarks]Double edge trimming, with a special groove on the back of the presser foot
  • ・[Video]
FS703P-G2C ・[Use]Sewing swimsuits ・[Maximum speed]4,200 sti/min ・[Fabric weight]Light ・[Remarks]Double edge trimming, with a special groove on the back of the presser foot
  • ・[Video]
FS703P-G3 ・[Use]Joining crotches of panties with pre-attached thin elastic lace ・[Maximum speed]4,200 sti/min ・[Fabric weight]Light~Medium ・[Remarks]Double edge trimming, with a groove 3.3 mm deep on the back of the presser foot
  • ・[Video]
FS703P-G4 ・[Use]Joining crotches of boxer briefs Inseaming on sweat pants Sewing medium-weight fleece ・[Maximum speed]4,200 sti/min ・[Fabric weight]Medium~Heavy ・[Remarks]Double edge trimming, with a groove 4.0 mm deep on the back of the presser foot
  • ・[Video]
FS701TP-G0 ・[Use]Sewing files with attaching tape of briefs ・[Maximum speed]4,200 sti/min ・[Fabric weight]Light~Medium ・[Remarks]Single edge trimming without a groove on the back of the preser foot
  • ・[Video]

LaRgo/FS700P series

FS700P-A :Equipped with a right and left independent differential feed adjustment mechanism, Oil Barrier type, 4-needle, feed-off-the-arm, interlock stitch machines for flat seaming

  • HIGH GRADE
  • OIL BARRIER
  • Bottom feed
Subclasses Use Maximum speed Fabric weight Remarks Video
FS703P-A-G2 ・[Use]T-shirts ・[Maximum speed]3800 sti/min ・[Fabric weight]Light ・[Remarks]Double edge trimming, with a special groove on the back of the presser foot
  • ・[Video]
FS701P-A-WG1 ・[Use]T-shirts ・[Maximum speed]3800 sti/min ・[Fabric weight]Light ・[Remarks]Single edge trimming, with a special groove on the back of the presser foot, wide knife
  • ・[Video]
FS703P-A-G2B ・[Use]Sports tights ・[Maximum speed]3800 sti/min ・[Fabric weight]Light~Medium ・[Remarks]Double edge trimming, with a special groove on the back of the presser foot
  • ・[Video]
FS703P-A-WG2B ・[Use]Sports tights ・[Maximum speed]3800 sti/min ・[Fabric weight]Light~Medium ・[Remarks]Double edge trimming, with a special groove on the back of the presser foot, wide knife
  • ・[Video]
FS703P-A-G2C ・[Use]Sewing swimsuits ・[Maximum speed]3800 sti/min ・[Fabric weight]Light ・[Remarks]Double edge trimming, with a special groove on the back of the presser foot
  • ・[Video]
FS703P-A-WG2C ・[Use]Sewing swimsuits ・[Maximum speed]3800 sti/min ・[Fabric weight]Light ・[Remarks]Double edge trimming, with a special groove on the back of the presser foot, wide knife
  • ・[Video]
FS701P-A-G0 ・[Use]Joining shoulders of T-shirt and underwear, Sewing files of briefs ・[Maximum speed]3800 sti/min ・[Fabric weight]Light~Medium ・[Remarks]Single edge trimming without a groove on the back of the preser foot
  • ・[Video]
FS703P-A-WG2D ・[Use]Joining shoulders of T-shirt and underwear, Sewing files of briefs ・[Maximum speed]3800 sti/min ・[Fabric weight]Light~Medium ・[Remarks]Double edge trimming, with a special groove on the back of the presser foot, wide knife
  • ・[Video]

ページの先頭へ

close